|
*This is perfect for an EMERGENCY source of power. It can run a refrigerator, lights, cell phone chargers and TV *
The Safety and Security Solar Generator Home Power Packs are custom assembled with the highest quality components and are designed to last for years even with everyday usage. Most of our systems use MPPT (Maximum Power Point Tracking) charge controllers for optimized maximum energy harvest and Pure Sine Wave Inverters that will operate even the most sensitive electronic equipment. Pure Sine Wave Inverters allow motors to run better and cooler; reduce audible and electrical noise in fans, fluorescent lights, audio amplifiers, TV's; fax and answering machines; and operate sensitive microprocessor equipment without the problems experienced by modified sine wave inverters.
We use sophisticated relay circuitry to provide low voltage disconnect of the inverter when the battery voltage drops below 11.50 Volts (optional 11.00 Volts) in order to protect the battery from over discharging and to preserve the life of the battery.
All circuits are over-current protected and there are fuses and/or breaker /disconnects to protect your equipment from damage.
We are able to mix and match solar panels and batteries to provide you with the combination of solar energy and battery power that will best suit your application(s).
Specifications for the Solar Generator 225AH/210W/300WAC solar home power pack generator.
Solar Generator Package & Dimensions:
Container: 25" long x 15" wide x 14" high - Weight Approx 175 lbs. (Plus Solar Panel)
Solar Panel Specifications:
Model - 225AH/210W/300WAC
Power (W) - 210 Watts
Open Circuit Voltage (V) - 22.80 Voc
Short Circuit Current (A) - 12.11 Isc
Maximum Power Voltage (V) - 18.30 Vmp
Maximum Power Current (A) - 11.48 Imp
Dimensions (in)(LxWxD) - 37 1/2" x 65" x 1 3/8"
Weight (lb) - 41 lb
Maximum Power Point Tracking Charge Controller:
MAXIMUM BATTERY CURRENT Maximum: 15 A
MAXIMUM OPEN CIRCUIT VOLTAGE: 75V
MAXIMUM PV INPUT: 200Wp (12V Battery), 400Wp (24V Battery)
SYSTEM VOLTAGE: 12/24V
5 YEAR WARRANTY
MAXIMIZES ENERGY HARVEST
PROVIDES POWER BOOST
USE OF HIGH VOLTAGE MODULES
CONVERTS 36V OR 24V NOMINAL ARRAY TO 24V OR 12V SYSTEM
INCLUDES LOAD CONTROL
COMPACT SIZE
HIGHLY RELIABLE
EXTENSIVE ELECTRONIC PROTECTIONS
LONGER BATTERY LIFE
FULLY ADJUSTABLE AND PROGRAMMABLE (Optional interface for PC)
MORE SYSTEM INFORMATION (Optional interface for PC)
DATA LOGGING (Optional interface for PC)
TEMPERATURE SENSOR (Optional)
Pure Sine Wave Inverter:
Power Continuous - 300 Watts
Power Surge - 500 Watts
Output Voltage - 120VAC +/- 3%
Output Frequency - 60 Hz
Output Voltage Waveform - Pure Sine wave
Input Voltage - 10.5 - 16.5 VDC
Input Current at No Load - <700mAv
Low Input Voltage Warning Alarm - 10.5VDC
Low Input Voltage Shut-down - 10.0VDC
High Input Voltage Shut-down - 16.5VDC
Operating Ambient Temperature - 0 to 40 degrees C
Peak Efficiency - 85%
Cooling - Temperature controlled Fan
DC Input Connections - Tubular Type Screwdown Terminals
AC output - 1 x Standard North American Outlet (NEMA 5-15R)
DC Side Input Fuse - 40A
Dimensions - 8.5" Long x 5.8" Wide x 2.6" High
Weight - 3.3 lbs
Battery Specifications:
The Solar Valve-Regulated Gel Monobloc series offers reliable, versatile, maintenance-free power. The thixotropic gel enables these batteries to be completely spillproof providing many available options for installation. The gelled electrolyte gives more protection to the battery plates, and is better suited for deep cycle discharge. With longer discharge and less charging time, these batteries are ideal for many renewable energy applications.
The Valve-Regulated Sealed construction eliminates periodic watering, corrosive acid fumes, and spills TM Technology Optimizes power capacity, cell consistency, and long-term reliability.
Gelled Electrolyte Electrolyte will not stratify.
Positive and Negative Plate are Lead calcium.
Self-Discharge Less than 2% per month stand loss means little deterioration during transport and storage.
Exclusive IPF Rated Non-Spillable by ICAO, IATA, and DOT; no special containers needed. Transports easily and safely by air.
The Solar series of valve-regulated, gelled-electrolyte batteries is designed to offer reliable, maintenance-free power for renewable energy applications where frequent deep cycles are required and minimum maintenance is desirable.
Specifications:
Voltage
12 volts nominal
Plate alloy
Lead calcium
Element, post
Threaded stud or flag terminal, forged bushing
Container/cover
Polypropylene
Electrolyte
Sulfuric acid thixotropic gel
Vent
Self sealing
Dimensions............20.75" Long x 11" Wide x 10" High
Weight....................157 lbs.
Capacity.................225 Amp Hours @ 20 hr rate
Questions? Contact sales@safetyandsecurityitems.com
|